Something to take note of: Should you have problems where your turn signals don't work at all, (assuming you know you have good turn signal bulbs and turn signal flasher) look to your hazard light switch!
Apparently, before any current goes to the turn signal flasher, it first runs through the hazard light switch. If you where to disconnect the hazard light switch, look at the connector going to the hazard switch, the bottom two connections can be "jumped" by inserting a small wire between the two. If your turn signals start working then you know it's the hazard switch. You can disassemble it and clean the contacts or just replace it. Hope that helps!
Hey! MGB driver enthusiasts! Join the fun! Post your comments and tell us about your MGB and fun and bad experiences. Got some tips or website recommendations? Post them! With the economy in the toilet and gas prices rising it's good to own a classic MGB. They become part of the family and are always pleasing to the eyes.
No comments:
Post a Comment